What is the operating process of the cow manure organic fertilizer granulator

 The operation process of the cow manure organic fertilizer granulator mainly includes multiple steps such as pretreatment, granulation, and subsequent treatment. The following is a detailed process description:

1. Preprocessing stage

A. Material preparation

Collect cow manure: Collect fresh or partially dried cow manure from breeding farms or centralized processing points.

Add auxiliary materials such as straw, straw, sawdust or other organic materials, mix them in a certain proportion, adjust the C/N ratio (carbon nitrogen ratio) to facilitate fermentation.

B. Adjust moisture content

Measure the moisture content of cow manure and adjust it to a suitable moisture range, usually 40% -60%, by adding water or drying if necessary, which helps the organic fertilizer granulator to work effectively.

C. Crushing and mixing

Use a grinder to crush cow manure and auxiliary materials into fine pieces, then mix thoroughly and evenly to ensure that each part is fully processed.

2. Granulation stage

D. Selection of Organic Fertilizer Granulator

Choose the appropriate type of granulator based on the required particle size, production requirements, and personal preferences, such as drum granulator, ring die granulator, or extrusion granulator.

E. Perform granulation

Send the pre processed material into the organic fertilizer granulator, start the machine, and begin the granulation process. During this process, humidity may be further regulated through methods such as adding water mist to ensure optimal granulation effect.

3. Follow up processing

F. Forming screening

After granulation, use a screening machine to remove irregular or oversized particles to obtain a uniform and consistent product.

G. Dry cooling

Using a dryer to reduce the moisture content of particles, usually to 10% -20%, for long-term storage and transportation.

Then, the temperature of the particles is lowered to near room temperature through a cooler to prevent mold or clumping during storage.

H. Packaging

The final step is to weigh and package the qualified particles, which is usually done using an automatic packaging machine for easy sales and use.

matters needing attention

Throughout the entire operation process, safety always comes first. Ensure that all operators have received training and understand the safe operating procedures of the machine. At the same time, regularly inspect and maintain equipment, keep it clean and lubricated, to extend equipment life and ensure production efficiency.

Correctly operating the cow manure organic fertilizer granulator and following the above process can efficiently produce high-quality organic fertilizers, providing strong support for agricultural production.